M & G Sawmill Huntsville, TX 936-439-0834Home PageProductAbout UsContact UsLinksFinished ProjectsMonthly SpecialsIndex Bottom M & G Sawmill Huntsville, TX 936-439-0834
Product

Bandsaw rough cut, Kiln Dried
Prices reflect a 50bf minimum purchase
Add 10% to lumber 10" wide or wider.
  Red Oak flat sawn 4/4 (FAS/SEL)
$2.25 bf
Red Oak Quarter Sawn 4/4 (FAS/SEL)
$3.55 bf
  White Oak 4/4 Quarter Sawn (FAS/SEL)
$3.95 bf
  Aromatic Red Cedar, 4/4
$1.85 bf
  Pecan / Hickory 4/4 Grade (FAS/SEL)
$3.65 bf
We have the very best mesquite lumber, flooring and mantels in Texas.
We HAND PICK our logs off the Frio River banks south of San Antonio.
  Mesquite 4/4 (Grade-1COM)
<5'$6.50bf / >5'-$7.50bf
  Mesquite 4/4 (Grade-FAS/SEL)
<5'-$9.50bf / >5'-$10.50bf
  Mesquite 8/4 (Grade-FAS/SEL)
<5'-$11.25bf / >5'-$12.50bf
Note: Mesquite bf pricing is determined by grade and board lenght.
>< greater or less than 5ft. long.
  Black Walnut 4/4 (Grade - FAS/SEL)
$4.25 bf
  Black Walnut 4/4 (Grade - #1 COM)
$3.60 bf
  White Ash 4/4 Grade (FAS/SEL)
$2.05 bf
  Southern Yellow Pine 1x4,1x6,1x8,1x10,1x12
starting @ .75bf
  We do supply thicker (8/4, 12/4, etc.) boards
Call or
  Osage Orange (Small Quantities)
Call or
  Maple (Red Leaf)
Call or
Hardwood Flooring - T&G W/Relief
Click to Enlarge
Mesquite - 1/2" x 5 1/2" exposure - 2' to 6' Long
$6.45sf
Click to Enlarge Mesquite - 1/2" x 3 1/2" exposure - 2' to 6' Long
$5.95sf
Click to Enlarge Rustic Oak - 3/4" x 3 1/2" or 5 1/2" exposure - 8' Long
$3.05sf
Note: Other species of hardwood flooring also available (e.g. Pecan, Ash)
Trim, Molding Special Cut & Millwork
 
Beams or Timbers of any dimension.
Call or
Turning stock.
Spalted Pecan, Mulberry, Mesquite & Burl Mesquite, Osage Orange (Bo'darc), Aromatic Cedar, Walnut Spalted Ash.
More stock to choose from.
Prices range from $4.00 to $40.00
Shipping available!!!
Call or
  Hardwood Flooring, Mesquite, Ash, Oak.
Call or
 
Molding & Trim
Call or
 
Fireplace mantels, Slabs, Bar tops
Call or
  Milled lumber
Call or
  Special sizes and cuts
Call or
  Have a tree you want milled into lumber?
Call or
  Millwork - Facing
Call or
  Kiln drying is available (a minimal applies)
Call or
Wood is Kiln Dried Between 8% to 11% moisture content.
Need help understanding what FAS/SEL, 4/4 or bf mean? Or other things
you see here on the products page? Click HERE for a helpful link.
Click HERE for directions to the sawmill
Cash or Check ONLY, sorry.
We are not setup for credit cards at this time.


Shipping not included.
NOTICE: We strive to make sure all our prices are correct and up to date
daily here at M&GSawmill.com. Typo's and pricing mistakes can happen
but pricing mistakes WILL NOT be honored. All prices mistakes will be corrected ASAP
.




M & G Sawmill © 2005-08All Rights Reserved
Please contact for site problems and concerns.